Toolholding Solutions
Parlec’s Toolholding Solutions are manufactured to maintain precision, functionality and durability. CAT, DIN, BT, HSK, NMTB, Chiron and Morse taper holders along with solutions for Balanced and Balanceable Heat Shrink, ER Collet Chucks, Power Milling and Shell Mill holders make up Parlec’s toolholding line.
Products
Back-Up Screws & Collet Wrenches
Single-Angle Collet Nuts, Single-Angle Type II & III Back-Up Screws & Single-Angle Collet Wrenches.
| Type II Part No. |
Type III Part No. |
A | B | Thread (Left-Hand) |
|---|---|---|---|---|
| BS-08 | CBS-08* | 3/16 | .56 | 15/16-16 |
| BS-10 | CBS-10* | 3/16 | .56 | 1 1/8-16 |
| BS-15 | CBS-15* | 3/16 | .75 | 1 5/8-12 |
| BS-18 | CBS-18* | 3/16 | .56 | 13/16-16 |
| Seals up to 750 PSI | ||||
| Part Number | Style | Type | B | C |
|---|---|---|---|---|
| 75HCN | 2 | Hex/Spanner | 2.10 | 1 7/8" |
| Part Number | Style | Type | B | C |
|---|---|---|---|---|
| 10CN | 1 | Spanner | 2.44 | - |
| 100HCN | 2 | Hex/Spanner | 2.44 | 2 1/4" |
| Part Number | Style | Type | B | C |
|---|---|---|---|---|
| 15CN | 1 | Spanner | 3.43 | - |
| Part Number | Type | Size (Inches) |
|---|---|---|
| 75HCNW | OPEN END | 1 7/8 |
| 100CNW | PIN SPANNER | - |
| 100HCNW | OPEN END | 2 1/4 |
Made in USA