Products

Selection Guide

• PC Connection
  
• Small Diameter & Finish Boring Systems
  
• Rough Boring Head Systems
  
• Large Diameter Boring System
  
• Inserts Information
  
• Inserts
  
• Insert Carbide Grades
  
• System Overview
  

Modular Components

• Modular Shanks
  • V-Flange Shanks
  • DIN-69871 Shanks, Form ADB
  • BT Shanks
  • HSK Shanks
  • NMTB Shanks
  • Straight Shanks
• Large Diameter Boring System
  • Modular Boring Ring Holders
  • Boring Ring Adapters
• Common Components
  • Extensions
  • Reductions
  • Heavy Metal Extensions
  • PC Screws

Precision Finish Boring

• Small Diameter Boring
  • Boring Heads .078"-1.342" (2mm to 34mm)
  • Boring Screws, Pins & Wrenches
  • Boring Bars & Holders
  • Boring Bars & Bushings
  • Triangular
  • 80° Diamond
  • Balanceable Modular Boring Kit
• Precision Finish Boring Heads
  • Precision Finish Boring Heads from .984" (25mm) to 6.00" (152mm)
  • Optional Extended Reach Insert Holders
• Precision Finish Boring - Large Diameter
  • Precision Finish Boring Heads 5.95" to 8.27" (151 mm to 210 mm) Modular PC Connection Boring Ring Adapter
  • Precision Finish Boring Heads 6.00" to 21.89" (152.4 mm to 556 mm) Bolt on Boring Ring Adapter
• Precision Finish Boring Insert Holders
  • Optional Precision Finish Boring Insert Holders
  • Triangular Inserts
  • Precision Finish Boring Insert Holder Blanks
• Precision Finish Boring Components
  • Precision Finish Boring Cartridges
  • Precision Finish Boring Head Components
  • Precision Finish Boring - Large Diameter Components

Twin Bore Roughing

• Twin Boring Heads
  • Twin Boring Heads .95" to 6.00" (25mm to 152.4 mm)
  • Twin Boring 6.00" to 8.27" (152.4mm to 210mm) Modular PC Connection Boring Ring Adapter
  • Twin Boring 5.95" to 21.89" (151mm-556mm) Bolt On Boring Ring Adapter
• Twin Boring Insert Holders
  • Style 2 - For use with CCMT Inserts
  • Style 1 - For use with CCMT Inserts
  • Style 3 - For use with WCMX Inserts
• Twin Boring Inserts
  • Square Inserts
  • 80° Diamond Inserts
  • Trigon Inserts
• Rough Boring Components
  

Modular Toolholding

• Collet Chucks
  
• End Mill Holders
  
• Morse Tapers
  
• Shell Mill Holders
  

Technical Information

• Operating Instructions: Twin Cutter
  
• Balanced Cutting
  
• Stepped Cutting
  
• Rough Boring Chip Formation
  
• Operating Instructions: Finish Boring
  
• Finish Boring Speeds
  
• Rough Boring Feed Rates & Machining Allowance
  
• Roughing Speeds