Toolholding Solutions
Parlec’s Toolholding Solutions are manufactured to maintain precision, functionality and durability. CAT, DIN, BT, HSK, NMTB, Chiron and Morse taper holders along with solutions for Balanced and Balanceable Heat Shrink, ER Collet Chucks, Power Milling and Shell Mill holders make up Parlec’s toolholding line.
Products
Heat Shrink Accessories
| Part Number | Taper Size |
|---|---|
| BHS-SK40WK | CAT/BT 40 TOOL POT |
| BHS-SK50WK | CAT/BT 50 TOOL POT |
| BHS-HSK63WK | HSK 63 TOOL POT |
| BHS-HSK100WK | HSK 100 TOOL POT |
| Part Number | Description |
|---|---|
| BHS-SK40WK2 | CAT/BT 40 TOO POT |
| BHS-SK50WK2 | CAT/BT 50 TOOL POT |
| BHS-HSK63WK2 | HSK 63 TOOL POT |
| BHS-HSK100WK2 | HSK 100 TOOL POT |
| Other Tool Holder Pot Sizes Available on Request | |
| Part Number | Holder Sizes Metric | Holder Sizes Inch |
|---|---|---|
| BHS-C0187-6 | 4 | 3/16" |
| BHS-C0312-6 | 6, 8 | 1/4", 5/16" |
| BHS-C0375-6 | 10 | 3/8" |
| BHS-C0500-6 | 12 | 1/2" |
| BHS-C0625-6 | 14, 16 | 5/8" |
| BHS-C0750-6 | 18,20,22 | 3/4" |
| BHS-C1000-6 | 22,25,28 | 7/8", 1" |
| BHS-C1250-6 | 32 | 1 1/4" |
| BHS-C1500-6 | 36 | 1 1/2" |
| BHS-C2000-6 | - | 2" |
| 9 Degrees (4.5 per side) available on request. | ||
| Part Number | Holder Sizes Inch |
|---|---|
| HSP-MA0250 | 1/4" |
| HSP-MA0312 | 5/16" |
| HSP-MA0375 | 3/8" |
| HSP-MA0500 | 1/2" |
| HSP-MA0625 | 5/8" |
| HSP-MA0750 | 3/4" |
| HSP-MA0875 | 7/8" |
| HSP-MA1000 | 1" |
| HSP-MA1250 | 1 1/4" |
| HSP-MA1500 | 1 1/2" |
| HSP-MA2000 | 2" |
| Part Number | Hex Size | Size |
|---|---|---|
| BS-SF51624LH-.75 | 1/8" | 5/16-24 x .75 |
| BS-SF51624LH-1.25 | 1/8" | 5/16-24 x 1.25 |
| BS-SF3824LH-1.25 | 7/32" | 3/8-24 x 1.25 |
| BS-SF5818LH-.75 | 3/8" | 5/8-18 x .75 |
| BS-SF5818LH-2.0 | 3/8" | 5/8-18 x 1.25 |
| BS-SF5818LH-1.25 | 3/8" | 5/8-18 x 2.0 |
| Part Number |
|---|
| BHS-100100 |
| Part Number |
|---|
| BHS-100173 |
| Part Number | Description |
|---|---|
| BHS-10001 | INDUCTION COIL RANGE 1-1/2" - 2" (36-50MM) |
| For use wtih BHS-3200WK only | |
Made in USA