Boring Solutions
Accurate and cost effective, Parlec’s Boring Solutions Provide .0001" (.002mm) adjustment precision for a variety of bores along with advanced adjustable twin bore roughing systems. Precision modular component design allows for reduced inventory and stock delivery while ISO/ANSI inserts reduce production costs.
Products
Operating Instructions
Configuration
Insert Holder mounted in the standard boring position.Assembly
Install the Insert Holder to the Spindle using the Insert Holder Screw.Adjustment
1. Loosen the Spindle Lock Screw.2. Adjust tool by turning and reading the dial. The dial is graduated in increments of .001” or .02mm per graduation on the diameter. Fine adjustment of .0001” or .002mm can be made utilizing the Vernier Scale.
3. Tighten the Spindle Lock Screw.
Using the Inch Vernier Scale
Find the line in the vernier scale that exactly lines up with a reference line. Diametral increases in .001” are made by adjusting the Dial clockwise one full line on the fixed scale. Diametral increases in .0001” are made by adjusting the Dial clockwise until the appropriate line on the vernier scale lines up with the next fixed scale reference line.
Using the Metric Vernier Scale
Find the line in the vernier scale that exactly lines up with a reference line. Diametral increases in .02mm are made by adjusting the Dial clockwise one full line on the fixed scale. Diametral increases in .002mm are made by adjusting the Dial clockwise until the appropriate line on the vernier scale lines up with the next fixed scale reference line.
| Head | Insert Holder Clamp | Slide Lock |
|---|---|---|
| 2 | 11 in-lbs (1 Nm) | 5 in-lbs (0.5 Nm) |
| 3 | 20 in-lbs (2.2 Nm) | 13 in-lbs (1.5 Nm) |
| 4 | 25 in-lbs (2.8 Nm) | 22 in-lbs (2.5 Nm) |
| 5 | 50 in-lbs (5.6 Nm) | 50 in-lbs (5.6 Nm) |
| 6 | 130 in-lbs (14.7 Nm) | 85 in-lbs (10 Nm) |
| 7 | 130 in-lbs (14.7 Nm) | 85 in-lbs (10 Nm) |
Made in USA