Selection Guide
Rough Boring Head Systems
Selecting a Rough Boring System] (.984” to 6.000”)
Step 1.
Select shank based on machine taper, projection and PC connection (identified in Step 3).
Step 2.
Select extensions and/or reductions based on projection required and diameter to length ratio.
Step 3.
Select boring head based on boring range.
Step 4.
Select insert holder pair based on geometry and diameter range.
Step 5.
Select insert based on bar geometry, work piece material and finish required.
Selecting a Rough and Finish System (5.95” to 8.27”*)
Step 1.
Select shank (PC6 size) based on machine taper and projection required.
Step 2.
Select PC6-7108.
Step 3.
Select boring components using Steps 4-7 on Large Diameter Boring System.
∗For lightweight applications.
