Boring Solutions
Accurate and cost effective, Parlec’s Boring Solutions Provide .0001" (.002mm) adjustment precision for a variety of bores along with advanced adjustable twin bore roughing systems. Precision modular component design allows for reduced inventory and stock delivery while ISO/ANSI inserts reduce production costs.
Products
Set-up and Components
Installing Insert Holders:
1. Remove the two insert holder clamps and set aside. 2. Place the insert holders in the head, making sure the slot in the bottom of the insert holder engages the head of the diameter adjusting screw. 3. Install the insert holder clamps (cap screw on size two). Make sure that the nut is flush with the end of the screw. 4. Snug up the insert holder clamps.
It is recommended that the Parlec twin boring heads be adjusted on a tool presetter. Refer to Parlec Parsetter catalogs for more information.
| Rough Head | Insert Holder | PC Screw |
|---|---|---|
| PC2-4205 | 12 (1.3 Nm) | 36 (4.1 Nm) |
| PC3-4305 | 36 (4.1 Nm) | 48 (5.5 Nm) |
| PC4-4405 | 48 (5.5 Nm) | 72 (8.3 Nm) |
| PC5-4505 | 72 (8.3 Nm) | 96 (11.1 Nm) |
| PC6-4605 | 72 (8.3 Nm) | 120 (13.9 Nm) |
| Part Number | Diameter Adjust. Screw | Insert Holder Clamp (Pair) | Height Adjust. Cam (Pair) | Wrench Kit | Spare Kit | PC Pin |
|---|---|---|---|---|---|---|
| PC2-4205 | 4205-11 | 4205-12 | 4205-13 | 4205-14 | 4205-10 | PCP-002 |
| PC3-4305 | 4305-11 | 4305-12 | 4305-13 | 4305-14 | 4305-10 | PCP-003 |
| PC4-4405 | 4405-11 | 4405-12 | 4405-13 | 4405-14 | 4405-10 | PCP-004 |
| PC5-4505 | 4505-11 | 4505-12 | 4505-13 | 4505-14 | 4505-10 | PCP-005 |
| PC6-4605 | 4605-11 | 4605-12 | 4605-13 | 4605-14 | 4605-10 | PCP-006 |
| PC6-4606 | 4605-11 | 4605-12 | 4605-13 | 4605-14 | 4605-10 | PCP-006 |
| PC7-4705 | 4605-11 | 4605-12 | 4605-13 | 4605-14 | 4605-10 | PCP-007 |
| 7100-B460 | 4605-11 | 4605-12 | 4605-13 | 4605-14 | 4605-10 | - |
| Diameter adjustment screw, insert holder clamp, height adjustment cam, and wrench kit included in spare kit. | ||||||
Made in USA