Tapping Solutions

Parlec’s Tapping systems provide superior application with the Numertap® system 770 providing the largest range of tapping. Rigid, tension only or tension and compression systems are standard, along with coolant or coolant groove adapters with up to 6" extension length.


Tapping

Products

Tap Adapters

Click to Enlarge [+]
  • For use in Numertap 6000 Attachments.
6000 TAP ADAPTERS
Part Number Coolant** Coolant Groove** Tap Size Metric Tap Size (ANSI*) B C Tp Shank Square
6-075 6-075C 6-075CG 3/4 M19 2.50 1.00 2.21 .590 .442
6-081 6-081C - 13/16 M20 2.50 1.00 2.43 .652 .489
6-087 6-087C - 7/8 M22 2.50 1.00 2.59 .697 .523
6-093 6-093C - 15/16 M24 2.50 1.00 2.61 .760 .570
6-100 6-100C 6-100CG 1 M25 2.50 1.00 2.76 .800 .600
6-106 6-106C 6-106CG 1 1/16 & 1 1/8 M27 2.50 1.00 2.70/3.01 .896 .672
6-118 6-118C 6-118CG 1 3/16 & 1 1/4 M30 2.50 1.00 2.84/3.15 1.021 .766
6-131 6-131C 6-131CG 1 5/16 & 1 3/8 M33 2.50 1.00 3.09/3.40 1.108 .831
6-144 6-144C 6-144CG 1 7/16 & 1 1/2 M36 2.50 1.00 3.34/3.65 1.233 .925
6-162 6-162C 6-162CG 1 5/8 M39 2.50 1.00 3.96 1.305 .979
6-175 6-175C 6-175CG 1 3/4 M42 3.20 1.00 4.15 1.430 1.072
6-187 6-187C 6-187CG 1 7/8 M45 3.20 1.00 4.46 1.519 1.139
6-200 6-200C 6-200CG 2 M48 3.20 1.00 5.13 1.644 1.233
6-212 6-212C 6-212CG 2 1/8 - 3.20 3.10 5.50 1.769 1.327
6-225 6-225C 6-225CG 2 1/4 M56 3.20 3.10 5.71 1.894 1.420
6-237 6-237C 6-237CG 2 3/8 - 3.20 3.10 5.96 2.018 1.524
6-250 6-250C 6-250CG 2 1/2 - 3.40 3.10 6.15 2.100 1.585
- - - 3/8 NPT - 2.50 1.00 1.06 .700 .531
- - - 1/2 NPT - 2.50 1.00 1.50 .687 .515
6-075N 6-075NC - 3/4 NPT - 2.50 1.00 1.56 .906 .679
6-100N 6-100NC - 1 NPT - 2.50 1.00 1.89 1.125 .843
6-125N 6-125NC 6-125NCG 1 1/4 NPT - 2.50 1.00 1.96 1.312 .984
6-150N 6-150NC 6-150NCG 1 1/2 NPT - 2.50 1.00 2.05 1.500 1.125
6-200N - 6-200NCG 2 NPT - 3.20 3.10 2.20 1.875 1.406
*For DIN, ISO, or Imperial Metric Shanks, please call Parlec or your local Parlec representative. **Coolant requires oil hole tap. Coolant groove uses standard taps. Both require coolant-fed unit. NUMERTAP torque controlled adapters require no adjustment. Each adapter is calibrated for approximately 80% of the tap breakage torque for most standard hand, plug, or bottom taps.